Now that Round LED ceiling panel light is becoming more and more popular, there are a lot of LED panel lights produced by counterfeit factories on the market. These counterfeit factories use low-cost and inferior LED parts in order to reduce costs. This production method produces The product has quality problems, so here is a reminder to pay attention to the following points when buying:

1. The durability of Round LED ceiling panel light does not meet the standard requirements, mainly because the driving power used by the lamp does not meet the standard. If an abnormality occurs, it will easily cause the driving power to burn out, making the lamp unable to continue to use, or even causing safety problems. . However, the LED panel light of Huahui Lighting adopts a unique constant current isolation drive, which can be equipped with high power factor, high reliability and stable performance, and the products meet the requirements of safety regulations and electromagnetic compatibility.

2. The production technology of Round LED ceiling panel light is rough, and there are obvious safety hazards in the process of assembly and use. For example, the sharp corners of the lamps can easily cause damage to the installation and maintenance staff, and there are burrs in the internal wiring. The insulation of the wire has fallen off, causing a safety hazard for electric shock.

3. The internal boundary area of ​​Round LED ceiling panel light is relatively small. The current standard is 0.5mm2/0.75mm2. If it is smaller than this standard, a large current will be generated, which will easily burn out the wires and cause electric shock or fire accidents. . Huahui lighting LED panel light uses smart IC power supply to stabilize the current for the LED under unstable voltage, effectively preventing the short-circuit and open-circuit of the LED from affecting the life of the LED.