RADAR SENSOR PANEL LIGHT is a radar sensor switch that uses the principle of Doppler effect to independently research and develop a plane antenna transmitting and receiving circuit, intelligently detects the surrounding electromagnetic environment, and automatically adjusts the working status; after the RADAR SENSOR PANEL LIGHT sensor switch is turned on, it will be within the delay time period. , If there is human activity, the switch will continue to be turned on until the person leaves and the time is extended.

RADAR SENSOR PANEL LIGHT can control whether the switch works according to the intensity of the outside light to achieve energy saving effect. Compared with infrared products: RADAR SENSOR PANEL LIGHT has a longer sensing distance, wide angle, no dead zone, can penetrate glass, and thin wood, depending on the power, can penetrate walls of different thicknesses, not affected by environment, temperature, dust, etc. Influence, in the case of 37 degrees, the sensing distance will not be shortened.

Advantages of RADAR SENSOR PANEL LIGHT:

RADAR SENSOR PANEL LIGHT can be installed into the ceiling by opening holes, or it can be installed directly on the ceiling, which effectively solves the problem of light-controlled daytime work!

RADAR SENSOR PANEL LIGHT can manually adjust the sensing distance, delay time, and light control illuminance, which can be adjusted at will according to the installation environment. When adjusting the adjustable product, please use a flat-blade screwdriver to adjust it gently. When resistance is encountered, it is the end. You can't go any further, otherwise the parts will be damaged.