If we want to install Directly Emitting Ceiling Light ourselves, we should firstly distinguish the components of the ceiling light. Because after we have divided these parts clearly, we can know which ones to connect at each step. For the Directly Emitting Ceiling Light used in the family, it can be divided into the following three parts. Everyone can find out.

①: The bottom box of Directly Emitting Ceiling Light, which is the part of the power supply we reserved. This part is generally in the top plate, buried in the bottom box of the lamp installed. After the circuit modification in our house is completed, the wires must be passed to this position. There are generally two wires in the common bottom box to meet the installation of our ceiling lamps. This is a basic condition for the installation of ceiling lamps, that is, the power supply.

②: The base of Directly Emitting Ceiling Light. That is to say, after we want to buy a ceiling lamp, we can take it apart. One of the most important parts is the base of the ceiling lamp. The base of the ceiling lamp is generally made of metal or other materials, and the other part is the light source of the lamp inside. . This part is about to be disassembled as a whole. And we will find that the bottom plate of the ceiling lamp has reserved screw holes, which are used when installing with our ceiling or bottom box.

③: The other part of Directly Emitting Ceiling Light is the shade of the ceiling lamp. Because no matter what kind of bulbs the ceiling lights use, such as energy-saving bulbs or LED lamp beads, they are all installed on the bottom plate. In the later stage, we need to use the lampshade to cover all these bulbs inside, so that a good effect can be reflected. Therefore, the lampshade of the ceiling lamp can be disassembled.