Although the various ways of installing ETL DLC Edge-lit Panel Light are relatively simple, there are still some things that need to be paid attention to in the process of installing the LED panel, so as to ensure the stable performance and long service life of the lamp.

Notes for installing ETL DLC Edge-lit Panel Light:

Although the various ways of installing ETL DLC Edge-lit Panel Light are relatively simple, there are still some things that need to be paid attention to in the process of installing the LED panel, so as to ensure the stable performance and long service life of the lamp.

1. Make sure to check the integrity of the ETL DLC Edge-lit Panel Light when taking it out of the ETL DLC Edge-lit Panel Light box.

2. When installing the ETL DLC Edge-lit Panel Light, ensure a minimum distance of 0.2m from flammable materials, and pay attention to separate wiring for low voltage and high voltage.

3. The connection at the back of the lamp can be fixed with a wire clip to ensure that it is firmly fixed.

4. Ensure that the power cord of the lamp has sufficient length and is not subjected to tension or tangential force. Avoid excessive pulling force when installing the connection of lamps and lanterns, and do not make the connection knotted. The output connection should pay attention to the difference, and do not mix it with other lamps.

5. After installation, connect the input end of the lamp to the switch, and connect the low-voltage plug of the lamp to the low-voltage plug of the switching power supply.

6. Connect the tail of the switching power supply of the lamp to the mains for connection. Generally, the brown (black) line is the front line, and the blue line is the zero line.

The above is the installation method of ETL DLC Edge-lit Panel Light compiled by Xiaobian for you. Whether you install it yourself or not, this article can improve our understanding of ETL DLC Edge-lit Panel Light. I hope you have a happy shopping and install carefully. , pay attention to safety.